Beer filling triblock AVIS 6000

Triblock filling (rinsing, pouring and capping) is designed for filling beer, kvass, lemonades and sugar drinks into plastic or glass containers. The maximum productivity of the triblock is up to 6000 bottles per hour.

Rinse block

• The machine is made of 304 stainless steel, except for the lower frame, transmission parts and some parts that must be made of special materials.
• The roller bearing is made of stainless steel, the O-ring is made of EPDM material and the plastic is made of UMPE.
• The grips on the rinsing carousel are made of stainless steel, which holds the bottleneck, also made of stainless steel, compared with the traditional rubber grip, it is more hygienic, durable and does not contain wear parts, the screw parts of the bottleneck can avoid contamination by the rubber grip.
• Equipped with a high-efficiency spray nozzle, the gripper can move to any position on the inner wall of the bottle and save rinsing water. There is a cap above the spray nozzle, which can prevent water from spilling; and under the nozzles there are control holes for recirculation.
• Adjustment available for different bottle heights.
• Water supply is controlled by a solenoid valve.

Filling block

• The filling unit consists of a filling tank with filling valves. The valve is an advanced design with high filling speed, no hygienic corner pocket, multiple sealing parts and precise liquid level control. The entire valve is made of 304 stainless steel.
• The filling system has a CIP connection for effective cleaning of the product supply pipe, filling tank, filling valves.
• The filling system is equipped with automatic product temperature control.
• The filling process consists of the following steps:
  – Blowing the empty bottle with CO2 to ensure a minimum amount of oxygen during the filling process;
  – Creation of working pressure of CO2 atmosphere in the bottle,
  – Opening the valve and filling with product,
  – Pressure equalization. Isobaric filling is used. The product supply valve opens and begins filling when the pressure inside the bottle is in equilibrium with the filling tank.
• Liquid supply is provided by automatic pneumatic valve with magnetic liquid level switch for automatic liquid level control.

Plastic screw cap sealing block

• The capping unit consists of electromagnetic heads.
• Caps are supplied from a belt-type hopper; a correctly oriented cap is lowered along guides to the bottles.
• The cap elevator is equipped with a bottle detection sensor, no bottles – no caps feeding. Also, if there are no caps, the machine stops.
• Adjustment for different bottle heights is provided.
• The capped bottles are conveyed to the outfeed plate conveyor.